SPRAY GLUE GUN
Before use
Check the pressure and if necessary, adjust it.
Connect the gun to the presser.
Check if the machine is hit.
When working with chemicals, we always review the safety measures of the chemical product. Never use two different products with the same gun. The gun can clog. Also do not work the gun with products of foreign companies, because this is designed only for MAKRA products.
Cut the nose of the glue. Screw the jointer firmly into the gun. We also screw the accessory to the back of the glue.
With the two screws, the air and quantity are adjusted.
After use
Disconnect the machine from the press.
Keep the machine and adhesives out of the reach of children.
Caution!
There must always be an adhesive in the gun.
Never leave the gun empty, as there is a risk of the material inside the gun drying out.
Cleanliness
Parts must always be clean.
Dried residues can be cleaned without chemicals.
AIR GLUE GUN
For the use of products up to 400 ml
Easy use
Adjustable pressure
It is light and strong in its construction
EPOXY GLUE GUN
Gun with double cartridge for all MAKRA 2K glues in double cartridge 50ml
Heavy duty metal construction
TAR – WAX GUN FOR 1lt
Before use
Check the pressure and if necessary adjust it.
For ideal results the air must be clean and dry.
Open the gun and insert one liter of product.
Screw on the cap.
Then connect the gun to the presser.
In the upper part you can adjust the amount of air with the screw, depending on the result you want:
Too much air = thin result
Little air = thick result
With the second screw you can adjust the quantity of the product.
After use
Disconnect the gun from the presser and keep it out of the reach of children.
Keep the gun upright.
In case of residual material, screw the screw in the upper part well, so that the material does not dry out.
Cleaning
If the gun will not be used for a long time (about 4 weeks), clean it with TAR CLEANER.
CLEANING SCRAPERS
The cleaning scraper has a stable and large handle, with a very sharp blade.
This way you can remove the remains of the old glue up to 1-2 millimeters.
The blade can be changed easily without additional tools.
Code for spare scraper blades: 702-93 (10 pcs)
REPLACEMENT RAZOR BLADES (10pcs)
Replacement blades for the Cleaning Scraper (code 702-92).
Very sharp blade.
It can be easily changed without additional tools.
Packaging: 10 pcs
NOSE WINDSHIELD EXTRACTION PLIERS
Windshield Removal Pliers:
These pliers are used as a supplement to Windshield Wire 702-2.
They do not injure the dashboard, windshield and other parts of the car during use.
HANDLE WINDSHIELD EXTRACTION PLIERS
Windshield Removal Pliers:
These pliers are used as a supplement to Windshield Wire 702-2.
They do not injure the dashboard, windshield or other parts of the car during use.
WINDSHIELD SUCTION CUP
The Windshield Suction Cup ensures a strong grip even on non-smooth surfaces.
GRILL FOR WINDSHIELD
Made of durable steel tube for stability
Folding
Adjustable height
Capacity up to 120 kg
POP-STAR BRUSH SPRAY GLUE -3IN1- 310ml
New technology joint glue for all purposes.
- Brush
- Spraying
- Sealing
- Sticking
Packaging: 12 pcs
ALL AIR-BAG TYPES ADHESIVE ADHESIVE 310ml (30′)
- Adhesive for all types of cars and windshields without primer.
- Time to restart the car after installing the windshield 30min (also with double airbag).
- Processable at temperatures from -17°C to +30°C.
- It is worked cold.
- Sealing time 15-20 minutes.
- Ideal for aluminum as well as new technology hybrid bodies.
- It meets the European and global specifications and FMVSS 208/212 standards which are the strongest tests and CRASH TEST.
- Works only with MAKRA PRIMER 4IN1 PRIMER 30ml (Code 302-61-2).
Packaging: 12 pcs
STICKS SEALS 500 BLACK 310ml
- A product specialized for use on cars.
- Excellent adhesion to many types of metal (e.g. aluminium, zinc and steel), varnish, wooden surfaces, Duro and thermoplastic (except PE, PP, PTFE), glass and metallized substrates.
- Can be lacquered even wet.
- After 2 hours the surface should be cleaned with MS PRIMER 77.
- It is elastic with very good moisture and resistant to weather conditions.
- The permitted temperature during use is from -40°C to +90°C (in coastal areas the permitted temperature reaches up to +120°C).
- Special for sticking.
- Does not contain silicone and isocrinate.
Packaging: 12 pcs
STICKS SEALS 500 WHITE 310ml
- A product specialized for use on cars.
- Excellent adhesion to many types of metal (e.g. aluminium, zinc and steel), varnish, wooden surfaces, Duro and thermoplastic (except PE, PP, PTFE), glass and metallized substrates.
- Can be lacquered even wet.
- After 2 hours the surface should be cleaned with MS PRIMER 77.
- It is elastic with very good moisture and resistant to weather conditions.
- The permitted temperature during use is from -40°C to +90°C (in coastal areas the permitted temperature reaches up to +120°C).
- Special for sticking.
- Does not contain silicone and isocrinate.
Packaging: 12 pcs
SPRAY GLUE BLACK 310ml
- Spray wet too.
- For most synthetic and metal parts.
- It takes about 5 days for complete drying and then the surface is ready to be varnished.
- We consider testing before use essential.
- Weather and temperature conditions should be approximately from -40°C to +80°C (short term up to +120°C).
- Great durability over time.
- Does not contain silicone and isocrinate.
- A product specialized for use in cars.
- Adheres very well to many types of metal (e.g. aluminium, zinc and steel), varnish, wooden surfaces, Duro and thermoplastic (except PE, PP, PTFE), glass and metal substrate.
Packaging: 12 pcs
PRIMER – REACTIVATOR 4IN1 PRIMER 30ml
- This primer is an auxiliary product for all MAKRA WINDSHIELD ADHESIVES.
- Only used for bonding windshields that do not have a ceramic frame.
- It also fixes minor scratches caused by windshield extraction.
- It also acts as an anti-corrosive.
Packaging: 12 pcs
ENAMEL FOR WINDSHIELD 9ml
- Protection against rust and priming on the metal surfaces of the car.
- It does not allow rust to penetrate the metals.
- It is used for all primers, for damaged parts of the varnish, after removing the windshield.
- Special varnish primer from MAKRA.
- Permanent protection to the enamel that creates the foundation for the windshield adhesive to follow.
- Economical to use and quick drying, assimilates with MAKRA products.
Packaging: 1 pc
GRAY PAINTED TAR 1lit
It is a product that contains a viscous solvent. The coat is quickly sprayed onto a synthetic resin base and a synthetic fabric base with perfect coverage. The product dries extremely quickly in place for color. We consider testing before use essential. After drying, it provides a tight corrosive abrasion coverage. The film created after drying has a very good adhesion on smooth and lacquered sheet metal. After drying it can be scratched very easily. The product is applied to the surfaces that look like a protective varnish. Not suitable for elastic items.
- Resistant to oil and petrol.
- Can be varnished either dry or wet.
- Creates a base.
- Up to 10% can be mixed with the varnish.
Packaging: 12 pcs
PAINTED BLACK TAR 1lit
It is a product that contains a viscous solvent. The coat is quickly sprayed onto a synthetic resin base and a synthetic fabric base with perfect coverage. The product dries extremely quickly in place for color. We consider testing before use essential. After drying, it provides a tight corrosive abrasion coverage. The film created after drying has a very good adhesion on smooth and lacquered sheet metal. After drying it can be scratched very easily. The product is applied to the surfaces that look like a protective varnish. Not suitable for elastic items.
- Resistant to oil and petrol.
- Can be varnished either dry or wet.
- Creates a base.
- Up to 10% can be mixed with the varnish.
Packaging: 12 pcs
